Path: ...!2.eu.feeder.erje.net!feeder.erje.net!feeds.news.ox.ac.uk!news.ox.ac.uk!nntp-feed.chiark.greenend.org.uk!ewrotcd!.POSTED.chiark.greenend.org.uk!not-for-mail From: Theo Newsgroups: comp.sys.raspberry-pi Subject: Re: Duplicate MAC addresses Date: 13 Jul 2022 10:41:46 +0100 (BST) Organization: University of Cambridge, England Message-ID: <2YA*wt6Sy@news.chiark.greenend.org.uk> References: <20220708195605.5a2bf3aa@ryz> Injection-Info: chiark.greenend.org.uk; posting-host="chiark.greenend.org.uk:212.13.197.229"; logging-data="27440"; mail-complaints-to="abuse@chiark.greenend.org.uk" User-Agent: tin/1.8.3-20070201 ("Scotasay") (UNIX) (Linux/5.10.0-15-amd64 (x86_64)) Originator: theom@chiark.greenend.org.uk ([212.13.197.229]) Bytes: 1775 Lines: 20 Marco Moock wrote: > Please check if they really have the same MAC address when booted from > a new installed OS. It is possible to change the MAC address. > The MAC address of the physical interface (not any virtual interface) > should have an unique MAC address by default from the vendor. > You can override this if they really have the same MAC by default. Are the MAC addresses in the Broadcom MAC address allocation - I think it starts B8: ? (a Pi 3 here has B8:27:EB) I vaguely understood that pre-Pi4 there's no nonvolatile storage on the board to hold the MAC address, so I believe it's generated programmatically in the boot process (from the serial number, I presume). It would seem surprising to have a collision. The Pi4 has a proper EEPROM holding the boot firmware so there's scope to store the MAC in there - I haven't checked they do that though. Theo