Path: ...!3.eu.feeder.erje.net!feeder.erje.net!newsfeed.bofh.team!paganini.bofh.team!not-for-mail From: Wanderer Newsgroups: sci.electronics.design Subject: Re: silicone grease Date: Sun, 31 Mar 2024 10:45:17 Organization: To protect and to server Message-ID: <050658@dontemail.com> References: Injection-Info: paganini.bofh.team; logging-data="937925"; posting-host="GZD4yuXN4SeHOdzwQueG0Q.user.paganini.bofh.team"; mail-complaints-to="usenet@bofh.team"; posting-account="9dIQLXBM7WM9KzA+yjdR4A"; X-Notice: Filtered by postfilter v. 0.9.3 Bytes: 1541 Lines: 16 On Sat, 30 Mar 2024 11:14:10 -0700, John Larkin wrote: >Give a nice flat mosfet package and a flat heat sink, I wonder how >much benefit accrues from adding silicone grease. It's really messy in >production and it's hard to confirm proper application. A little >googling didn't provide hard numbers. > >I'm thinking a big-die TO-220 fet, bolted to a copper CPU cooler, AlN >or mica insulator, no grease, 40 watts. I guess I'll have to try it. Silpads. I used silpads since the 80's. I don't know if they are better or worse than grease, but they are good enough and most importantly they are consistant. What happens with testing on the prototypes, happens with production units. Shorts were always with the little vinyl grommets, you use to keep the screws from shorting to the part. You can squeeze those down to tight and cause a short.