Path: ...!eternal-september.org!feeder3.eternal-september.org!news.eternal-september.org!.POSTED!not-for-mail From: Cursitor Doom Newsgroups: sci.electronics.design Subject: Re: Scope Probes off Ebay Date: Sun, 07 Apr 2024 18:14:25 +0100 Organization: A noiseless patient Spider Lines: 51 Message-ID: <7gk51j5homhambnu4inj9dtsnehvh7v64p@4ax.com> References: <4l851jte21egs8mmkqou4proepifknb7v7@4ax.com> <55j51j5n2p9chajruolqrmqs57smippb5t@4ax.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Injection-Date: Sun, 07 Apr 2024 17:14:27 +0200 (CEST) Injection-Info: dont-email.me; posting-host="047d140331540669533227d2fbe449a7"; logging-data="3059295"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX19gEd2EPqj9d0D8KdcBmpxn2TmecVSW+P8=" User-Agent: ForteAgent/8.00.32.1272 Cancel-Lock: sha1:wUy9j1WaVOmAIUv529l/TqGJgWw= Bytes: 3607 On Sun, 07 Apr 2024 09:57:13 -0700, John Larkin wrote: >On Sun, 07 Apr 2024 14:51:29 +0100, Cursitor Doom >wrote: > >> I never learn. I bought a used "Agilent 500Mhz probe" off Ebay for 50 >>quid as the highest bandwidth probe I thought I had was a 150Mhz Tek >>one. Anyway, I have a large selection of old probes lying around so >>decided to check to make sure the "Agilent" one was genuine. Not >>surprisingly it turns out it isn't. I haven't calculated what it's >>real bandwidth is. I've established it's not as sensitive as the >>150Mhz one and that's all I need to know. Whilst I was going through >>this palarva, I tested a old probe I came across that I've never used >>before and was amazed at the improvement in signal I got with it. I've >>just Googled its part number and it turns out it's a 3.5Ghz passive >>probe! I never even knew I had one so fast. I would never have ordered >>the "500Mhz" one if I'd known I had this forgotten-about one already. >>So the fake's going back for a refund and I won't be ordering any >>more probes from anywhere in the forseeable future. > >The HP54006 is a 6 GHz probe, into a 50 ohm scope. > >https://www.dropbox.com/s/lxq4ujmkvo755uy/HP54006_probe.zip?dl=0 > >They show up on ebay now and then. There's one now, asking $150. > >You can make your own with some of those Caddock resistors. The >Caddocks have some magical recipe. And unlike a fet probe, they are >hard to damage. I use them to probe 7 ns 1400 volt spikes in my >Pockels Cell driver. Funny you should say that, but the 3.5Ghz probe I mentioned (a Tek P6056 to be precise) has a fragile resistor assembly in the tip according to the datasheet and it's easily damaged by rough handling. I'd be very interested to know what the secret sauce is in the Caddocks and why they're more robust than whatever Tek used in the P6056. > >And you can do a GHz at least with a 1-cent axial or mini-MELF or 0805 >resistor on the end of a coax. 450 ohms makes a 10:1 probe. Fast >circuits are often low impedance circuits and don't mind a 500r or 1K >load. Many years ago when I was somewhat impecunious, I used to improvise like that, but these days I prefer to just buy whatever I need ready made. Some of those top-end RF patch cables can be ruinously expensive to buy ready-made, but what are you gonna do? No matter how good you are with terminations, you'll never emulate the quality standard of a properly made, high quality patch lead. When you're as ham-fisted and half-blind as I am, it's a no-brainer to buy 'em ready-made!