Warning: mysqli::__construct(): (HY000/1203): User howardkn already has more than 'max_user_connections' active connections in D:\Inetpub\vhosts\howardknight.net\al.howardknight.net\includes\artfuncs.php on line 21
Failed to connect to MySQL: (1203) User howardkn already has more than 'max_user_connections' active connectionsPath: ...!Xl.tags.giganews.com!local-2.nntp.ord.giganews.com!nntp.earthlink.com!news.earthlink.com.POSTED!not-for-mail NNTP-Posting-Date: Fri, 24 Jan 2025 05:52:07 +0000 Subject: Re: News : ARM Trying to Buy AmperComputing Newsgroups: comp.os.linux.misc References: <_hycnQxlN5kAphr6nZ2dnZfqn_SdnZ2d@earthlink.com> <198f4f8c-a0d0-7caf-b67e-1f61fee9de41@example.net> <35e42921-5781-8728-236f-afad1d3b56b1@example.net> <7258fd01-44f7-850d-3f69-54b93489f64d@example.net> <_ASdnRmnz7GABhP6nZ2dnZfqn_qdnZ2d@earthlink.com> <39751a64-73b7-7c03-b140-8dd7d4b4355c@example.net> <8x2cne8LCIYpbxP6nZ2dnZfqn_GdnZ2d@earthlink.com> <5caa2a20-e6c6-720a-5e6c-54e41729d0a4@example.net> <2cf850b4-7fd8-4839-8b34-1d947c81e709@example.net> <6791595d@news.ausics.net> <7a74d4ef-ada7-66a6-8d41-ad048f426e64@example.net> <5a86ef6d-a33f-17ab-144a-9495159ca9f0@example.net> <6f7e0953-def3-9df6-80d9-732525cd3318@example.net> From: "186282@ud0s4.net" <186283@ud0s4.net> Organization: wokiesux Date: Fri, 24 Jan 2025 00:52:03 -0500 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.13.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8; format=flowed Content-Language: en-US Content-Transfer-Encoding: 7bit Message-ID: Lines: 59 X-Usenet-Provider: http://www.giganews.com NNTP-Posting-Host: 99.101.150.97 X-Trace: sv3-d37YeRU0g0qHU2SROR0AGsmpIrPueb62pHLpNjCnGImyRfS66d5/zsbjMYgkLgxAtcvOvDM0YUSQAj5!21Fr89NO1xX2aelITx/Kf2KxIUqf4xTJdrsCeydWNdoXLJHkOLsIeyXkuWF+fEMag3U0EBCsGDJ/!fUoQNWyz+2QK20AU5JtF X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly X-Postfilter: 1.3.40 Bytes: 4588 On 1/23/25 8:57 PM, rbowman wrote: > On Thu, 23 Jan 2025 21:59:58 +0100, D wrote: > >> I've seen some tutorials utilizing the GPIO pins. I imagine that that is >> where it would come in handy to avoid a birds nest of cables and crappy >> soldering. > > I use solderless breadboards and Dupont wires when playing around. It's > quick and dirty, emphasis on the dirty part. The preformed jumpers are > neater but they're a bit of a PITA. I've seen videos of people pressing > them in with no problems but that ain't me. > > I haven't done a PCB in decades and never was very good at it but that was > before software to help with the routing. There's still a lot of overhead > for a DIY project. > > https://www.instructables.com/DIY-PCB-using-Liquid-Photoresist/ I used to make two masks on transparency film using a laser printer. The masks are mirror images. You put the two toner layers smack together. This tends to fill all the little gaps. OK for 3mm spacing apps. Might be too fuzzy for modern submini chips. SMD is now sometimes the only way to get chips - and that means careful 'oven' work. Super-pain. Basically PCB development is moving out of the realm of human makers, everything's too tiny. > That's the basic procedure I followed. For one-offs I used presensitized > PCBs rather than spreading it on myself. For volume I'd make a silkscreen > but then you're into a whole other art form. The artwork was tape and > transfer symbols on mylar. > > Then you move on to etching. I used ferric chloride which is fairly nasty > stuff and tends to dye everything in sight yellow. Another choice was > sodium persulfate. I never used HCL and hydrogen peroxide. That seems to > have its fans. > > Then if you finally wind up with a flawless PCB the fun begins, drilling a > crap load of holes. A Dremel drill press helps. Depending on the board > material, buy a lot of bits. Still have my Dremel press - and boxes of the little drills. Patience, patience - and a steady hand. > All that makes the online services look extremely attractive. THESE days YES ! However back in the day most fabricators wanted 1000 units minimum ..... Copper MILLING also works, grind away the unneeded copper on the PCB. Gotta HAVE one of those mills, of course. Not worth it unless you do a LOT of protos.